UHF F4011 $199

Simple operation for instant communication

With only 3 buttons, one volume knob and one 16-position channel knob, the IC-F3011 series does not require special training to use. The large knobs and positive action buttons are easy-to-operate, even while wearing gloves.

Modern design, rugged body

The IC-F3011 series is compact (120mm; 4 ²³⁄₃₂ inch height) and light weight (approximate 300g; 10.6 oz with BP-232N and antenna). The aluminum die-cast chassis is the basis for this rugged construction, allowing long-life usage in various environments.

MIL-STD and IP54 rugged construction

The radio is tested to MIL-STD 810 specifications and to the IP54 rating for dust protection and water resistance. The IC-F3011 series is built to take harsh use and keep working.

Lithium-Ion battery standard

The IC-F3011 series comes with a high capacity 2000mAh (typ.) Li-Ion battery pack, BP-232N, as standard. The BP-232N offers up to 16 hours* of operation
* VHF typical operation with Tx:RX:Stand-by ratio=5:5:90.

CTCSS/DTCS tone encoder/decoder

The IC-F3011 series has the built-in CTCSS and DTCS capabilities as standard to access a repeater or to set up your own talk group for quiet stand-by.

Rapid battery charger supplied

The rapid desktop charger, BC-160 and AC adapter BC-145 is supplied with the radio. It charges the BP-232N Li-Ion battery in 3 hours (approx.)

Automatic scanning and priority scan

The power on scan function automatically starts scanning when turning on the radio. The priority scan function scans all programmed channels in sequence, while monitoring the priority channel.

Other features

• Low battery alert with blinking LED and low battery beep
• Wide frequency coverage (136-174, 400-470 and 450-512MHz)
• Wide/narrow channel spacing (25, 12.5kHz) programmable
• PC programmable
• 3-color LED (Red, Green, Orange)
• Talk around function
• time out timer
• Optional VOX headset
• 2-step power save

General
Frequency coverage	IC-F3011  136-174 MHz IC-F4011   400-470 MHz 450-512 MHz
Number of channels	16 channels
Channel spacing	12.5 KHz, 15/30 kHz
PLL channel step	2.5 kHz, 3.125 kHz (VHF) 5 kHz, 6.25 kHz (UHF)
Power supply requirement	7.2V DC
Antenna impedance	50OΩ
Operating temperature range	-30°C to +60°C; -22°F to +140°F
Current drain   Tx High (VHF)        High (UHF)   Rx Max. audio        Standby	1.5A 1.6A 300mA 70mA
Dimensions (proj. not included)	53(W) × 120(H) × 38(D) mm
Weight	300g; 10.6oz (with BP-209)
Transmitter
FM Hum and noise	46/40dB typ. (W/N)
Output power (at 7.2V DC)	5W (VHF), 4W (UHF)
Adjacent channel power	VHF    UHF  80/70dB typ. 75/68dB typ.
Max. frequency deviation	±5.0 kHz (at 25 kHz) ±2.5 kHz (at 12.5 kHz)
Frequency stability	±2.5ppm
Spurious emissions	80dBc typ.
Adjacent channel selectivity	75/65dB typ. (W/N)
Receiver
Sensitivity	0.25 µV (typ.) at 12 dB SINAD
Intermodulation rejection	74dB typ.
Squelch sensitivity	0.25μV typ. (at threshold)
Spurious response rejection	70 dB (typ.)
Hum and noise VHF UHF	50/45dB typ. (W/N) 45/40dB typ. (W/N)
Audio output power (at 7.2V DC)	500mW (typical at 5% distortion with an 8Ω load)
External speaker connector	2-conductor 3.5 (d) mm (1⁄8")⁄8Ω

Measurements made in accordance with EAIA-152-C/204D or TIA-603.

Applicable U.S. Military Specifications and IP Rating

Standard	MIL 810 F
	Method	Proc
Low Pressure	500.4	I, II
High Temp.	501.4	I, II
Low Temp.	502.4-3	I, II
Temp. Shock	503.4	I
Solar Radiation	505.4	I
Rain	506.4	I, II
Humidity	507.4	–
Salt Fog	509.4	–
Dust Blowing	510.4	I
Vibration	514.5	I
Shock	516.5	I, V

All stated specifications are subject to change without notice or obligation.

Supplied Accessories

• Battery pack:BP-232N
• Antenna
• Belt clip: MB-94
• Battery charger*, AC adapter*

* Depending on version