Icom F14/F24  $260  F14 VHF  F24 UHF  All handhelds come with antenna, lithium ion battery and standard charger. If you want a quick charger, a speaker mic or other accessories, go to the Icom accesory menu.   Frequency coverage IC-F14/F14S IC-F24/F24S   136 – 174 MHz (U.S.A. and General) 400 – 470 MHz (U.S.A. and General) 450 – 512 MHz (U.S.A.) 450 – 520 MHz (General) Number of channels 16 (IC-F14, IC-F24) 4 (Max.,IC-F14S, IC-F24S) Channel spacing 12.5KHz/25 kHz PLL channel step 2.5 kHz, 3.125 kHz (VHF) 5KHz, 6.25KHz (UHF) Power supply requirement 7.2V DC Current drain Transmit   Receive (at 7.2V DC; approx.) High 1.5A Low (1W) 0.7A stand-by 70mA rated output 300mA Antenna impedance 50Ω Usable temperature range –30°C to +60°C –22°F to +140°F Dimensions (with BP-231) (projections are not included) 53 (W) ×120 (H) ×38 (D) mm 23⁄32 (W) ×423⁄32 (H)×11⁄2 (D) in Weight (approx. with BP-231) 260g; 9.2oz Transmitter Output power 5W (VHF), 4W (UHF) Max. frequency deviation ±5.0/2.5kHz (Wide/narrow) Frequency error ±2.5ppm Spurious emissions 80dB typ. Adjacent channel power VHF UHF    80/70dB typ. (Wide/narrow) 75/68dB typ. (Wide/narrow) FM Hum and Noise 46dB typ. (Wide) 40dB typ. (Narrow) Audio harmonic distortion 3% typ. (AF 1kHz, 40% deviation) Modulation limiting 60–100% of max. deviation External microphone connector 3-conductor 2.5 (d) mm (1⁄10″)/2.2kΩ Receiver Sensitivity 0.25μV typ. (at 12dB SINAD) Squelch sensitivity 0.25μV typ. (at threshold) Adjacent channel selectivity 75dB typ. (Wide) 65dB typ. (Narrow) Spurious response 70dB Intermodulation 74dB typ. Hum and noise ratio 50dB typ. (Wide) 45dB typ. (Narrow) Audio output power 500mW typ. (at 5% distortion with an 8Ω load) External speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/8Ω Applicable U.S. Military Specifications Icom makes rugged products that have been tested to and pased the following MIL-STD requirements and strict environmental standards. Standard MIL 810C MIL 810D MIL 810E MIL 810F Method Proc. Method Proc. Method Proc. Method Proc. Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II High Temp. 501.1 I 501.2 I, II 501.3 I ,II 501.4 I, II Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4-3 I, II Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I Rain 506.1 II 506.2 II 506.3 II 506.4 III Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4 — Salt Fog 509.1 I 509.2 I 509.3 I 509.4 — Dust 510.1 I 510.2 I 510.3 I 510.4 I Vibration 514.2 VII, X 514.3 I 514.4 I 514.4 I Shock 516.2 I, II, IV 516.3 I, IV 516.4 I, IV 516.5 I, IV Measurements made in accordance with EIA/TIA-603. All stated specifications are subject to change without notice or obligation. Supplied Accessories May differ according to version Battery pack, BP-231 Antenna Belt clip, MB-94 Unit cover The IC-F14/S series shows Icom's new direction in LMR radio design. Simple operation for everyone but a powerful and reliable tool for your daily business. Its very durable construction is resistant to shock and vibration. The dual rail guide design securely locks the battery pack to the radio. Wide range frequency coverage, Li-Ion battery pack, loud and clear audio, built-in signalings and option unit connector combined with Icom grade electrical performance, the IC-F14/S series will easily exceed your expectations. Tough and reliable construction The IC-F14/S series is built around an aluminum die-cast chassis and covered with tough polycarbonate casing. This radio is built to last. Its dual slide rail securely locks the battery to the radio. The battery terminal is covered with a non-corrosive rubber packing. The belt clip is clamped between the radio and the battery, making it nearly impossible to knock loose. Simple operation Having only 3 buttons, volume and channel knobs, the IC-F14/S series does not require special training to use. Positive button action for sure operation even when wearing gloves, allows you to get down to the business of communicating without fuss. Wide frequency coverage The IC-F14/S series covers a wide frequency range with one version (136–174, 400–470, 450–512 (520) MHz). Wide and narrow channel spacing (25, 12.5kHz) is programmable per channel. Lithium-Ion battery standard The IC-F14/S series comes with the BP-231 Li-Ion battery pack as standard. Li-Ion batteries have virtually no memory issues and allows you flexible charging. In addition, the optional BP-232 provides a high capacity 2000mAh for longer operating time. Optional board The IC-F14/S series has an expansion socket for adding an optional board. Voice scrambler, man down and DTMF decoder features are available, depending on the installed board. Most popular signalings built-in Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own talk groups and quiet stand-by when others are talking. Multiple 2-Tone, Multiple 5-Tone Up to 10 2-Tone/8 5-Tone codes can be decoded on a channel. When a matched tone is received, the following items are programmable for each code. Beep sound Answer back Stun LED blink Scan Other features LED Low battery alert TOT function and lock out penalty timer 2 step power saver Normal and priority scan 500mW loud and clear audio Optional VOX headset for hands free operation PC programming capability Embedded ESN (Electronic serial number) MORE ICOM HANDHELDS

Icom F11/21 $165   F11 VHF  F21 UHF  More Handhelds at bottom of page Frequency coverage (Rx and Tx)* IC-F11/F11S  146-174 MHz IC-F21/F21S   400-430 MHz 440-470 MHz Number of channels Total 16 (rotary type) Total 4 (toggle type) Channel spacing 12.5 KHz, 25 kHz PLL channel step 2.5 kHz, 3.125 kHz (VHF) 5KHz, 6.25KHz (UHF) Output power 5 W, 2W or 1W (VHF) 4 W, 2W or 1W (UHF) Spurious emissions 73dBc typ. Adjacent channel power at 25KHz    at 12.5KHz  70 dB typ. 60 dB typ. Frequency stability VHF    UHF  ±5ppm  ±2.5ppm Sensitivity 0.25 µV (typ.) at 12 dB SINAD Adjacent channel selectivity at 25KHz    at 12.5KHz  70dB typ. 65dB typ. Spurious response rejection 70 dB (typ.) Audio output power 500 mW (type.) at 5% distortion an 8 ohm Current drain Receive Transmit    70 mA (standby) 250 mA (rated audio) 1.6 A (high) Dimensions (proj. not included) 54(W) × 128(H) × 37(D) mm Weight 310 g (with BP-209) Measurements made in accordance with EAIA-152-C/204D or TIA-603. Applicable U.S. Military Specifications Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows. Standard MIL 810 C MIL 810 D MIL 810 E MIL 810 F Method Proc Method Proc Method Proc Method Proc Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II High Temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4-3 I, II Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, II Humidity 507.1 I, II 507.2 II, III 507.3 III 507.4 – Salt Fog 509.1 I 509.2 I 509.3 I 509.4 – Dust Blowing 510.1 I 510.2 I 510.3 I 510.4 I Vibration 514.2 VIII, X 514.3 I 514.4 I 514.5 I Shock 516.2 I, II, V 516.3 I, IV 516.4 I, V 516.5 I, V All stated specifications are subject to change without notice or obligation. Supplied Accessories Battery pack:BP-209 Antenna Belt clip: MB-68 Battery charger*, AC adapter* * Depending on version For small or big businesses who need economical and instant two-way communications, these handhelds provide simple and quick contact at any time. Performance is never in question. Built-in multiple tone signalings, both wide and narrow channel spacing, 3 steps of output power and other superior features set a new benchmark.  Simple controls, easy to use Only the transmit button, volume control and channel selector are on the panel for simple operation. All three controls may be operated without removing the radio from your belt. The perfect business tool that doesn't require training to use.  Multiple selective calling functions Use the built-in signaling capability (2-tone, 5-tone, CTCSS and DTCS both encode/decode) to set up your own talk groups and to keep the radio quiet when others are talking. Also, a DTMF encoder is built-in. Durable 4 or 5W of output power Use a full 4 or 5W* when you need it. Increase the range of your transmissions indoors and outdoors where obstacles and walls often challenge other inferior equipment. * 4W for UHF models, 5W for VHF models. Other features Compact and light weight to carry all day Rotary 16 ch. type and simple toggle 4 ch. type Optional alkaline, Ni-MH or Li-Ion battery pack Wide/narrow capability, and more...